Free (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Demo Download
Cads-Group offers free demo for (). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Even if you know little about computers, you can easily begin to do exercises of the AZ-700 real exam dumps, If you want to be an excellent elites in this line, you need to get the AZ-700 certification, thus it can be seen through the importance of qualification examination, Microsoft AZ-700 Exams Torrent Our Product will help you not only pass in the first try, but also save your valuable time, If you intend to make a larger purchase and it does not fit the regular website single user account please contact on manager@Cads-Group AZ-700 Minimum Pass Score.com for details on this or for requesting a special quotation for your Order.
The Primary Actor, You can contact other buyers to confirm, No one lose interest during using our AZ-700 actual exam and become regular customers eventually.
If you would like to practice for the Microsoft AZ-700 exam questions, then you also can do so using the assist on the desired AZ-700 exam dumps and AZ-700 practice test.
Constructors and Destructors, Some architectures AZ-700 Exams Torrent do all this with registers, New Versions and/or bug fixes when you want to upgrade to a newer version of part of your application, CGEIT Exam Lab Questions you only need to install the upgrades at the server, not at every client.
The Paper Standard, Negotiating with the Customer, Minimum AWS-DevOps-Engineer-Professional Pass Score Everyone has an opinion, and most people want to know that their opinions are taken seriously, This week, we happened to be reminded of a AZ-700 Latest Exam Camp pointed and pithy Dilbert strip that reminds us all not to take certification too seriously.
Valid AZ-700 exam materials offer you accurate preparation dumps - Cads-Group
Engage professional advisors early in your AZ-700 Exams Torrent small business journey, Create online albums that automatically update themselves when you add photos, Recently, AZ-700 certification has become the hottest certification that many IT candidates want to get.
No part of the password exists in a dictionary AZ-700 Exams Torrent of any language, This is a book that challenged me and made me think at every turn, Even if you know little about computers, you can easily begin to do exercises of the AZ-700 real exam dumps.
If you want to be an excellent elites in this line, you need to get the AZ-700 certification, thus it can be seen through the importance of qualification examination.
Our Product will help you not only pass in the first https://examcollection.freedumps.top/AZ-700-real-exam.html try, but also save your valuable time, If you intend to make a larger purchase and it does not fit the regular website single user account please contact AZ-700 Exam Experience on [email protected] for details on this or for requesting a special quotation for your Order.
We are providing AZ-700 free demo for customers before they decide to buy our dumps, The key is choosing a right AZ-700 exam study material, which will shorten your time in the preparation.
New AZ-700 Exams Torrent | Reliable AZ-700 Minimum Pass Score: Designing and Implementing Microsoft Azure Networking Solutions 100% Pass
The link and materials are also fast and safe, With the dumps, you can pass Microsoft AZ-700 test with ease and get the certificate, We will never carry out the AZ-700 real exam dumps that are under researching.
It is the best training materials, Every AZ-700 exam torrent is professional and accurate, which can greatly relieve your learning pressure, One of outstanding features of AZ-700 Online soft test engine is that it has testing history and performance review, and you can have a general review of what you have learned before next training.
I f you are more like the paper version, then PDF version AZ-700 Exams Torrent will be your choice, since this version can be printed, Our goal is to become the number one in the market.
We always insist that the customer is always right and all of the stuffs in our company will help you to pass the AZ-700 actual test as well as getting the related certification for all our worth.
I had almost given up when as the last https://passguide.validtorrent.com/AZ-700-valid-exam-torrent.html resort I choose Cads-Group for the exam preparation tools of Microsoft exam.
NEW QUESTION: 1
App1という名前のコンソールアプリケーションを作成しています。
App1は、注文入力のユーザー入力を検証します。
次のコードセグメントを開発しています（行番号は参照用にのみ含まれています。）：
コードセグメントを完成させる必要があります。
解決策は、価格がプラスで小数点以下2桁があることを保証する必要があります。
どのコードを03行目に挿入しますか？
A. Option A
B. Option D
C. Option C
D. Option B
Answer: C
Explanation:
Exam Description
It is well known that (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
exam test is the hot exam of
AZ-700 certification. Cads-Group offer you all the Q&A of the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
real test . It is the examination of the perfect combination and it will help you pass (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
exam at the first time!
Why choose Cads-Group (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
braindumps
Quality and Value for the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
100% Guarantee to Pass Your (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
Downloadable, Interactive (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Cads-Group (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam Features
Quality and Value for the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
Cads-Group Practice Exams for AZ-700 (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
If you prepare for the exam using our Cads-Group testing engine, we guarantee your success in the first attempt. If you do not pass the (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
AZ-700 (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Downloadable, Printable Exams (in PDF format)
Our Exam (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Preparation Material provides you everything you will need to take your
(-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam. The (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
Our AZ-700 (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam will provide you with free
(-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test.
High quality and Value for the
(-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam:100% Guarantee to Pass Your
exam and get your
Certification.
http://www.Cads-Group.com The safer.easier way to get
Certification.
Feedbacks
Aalk - 2014-05-05 16:45:18
Plato - 2014-05-05 16:45:51
I successfully passed the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
exam, now I intend to apply for (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) groupYou have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
, you can be relatively cheaper?Or can you give me some information about (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) groupYou have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
exam?You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Eleanore - 2014-09-28 16:36:48