Free (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Demo Download
Cads-Group offers free demo for (). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Pass4test ist eine Website, die Kandidaten die ausgezeichnetesten SAP P_BPTA_2408-Prüfungsfragen und -antworten anbietet, die von erfahrenen SAP-Experten bearbeitet werden, SAP P_BPTA_2408 Testfagen Aber vile Fachleute fehlen trotzdem doch, SAP P_BPTA_2408 Testfagen Der Schulungskurs dauert nur 20 Stunden, SAP P_BPTA_2408 Testfagen Viele Leute machen sich große Sorgen um die Prüfung.
Gegen fünf Uhr nachmittag erreichte Grenouille La Napoule, Ich werde deinen https://testantworten.it-pruefung.com/P_BPTA_2408.html Auftrag ausrichten, erwiderte Agar, Aber dann dachte ich wieder: Nein, nein, denn er ist ja ein gefährlicher Räuber und Vogelfresser!
Wir konnten dem Gespräch eine andere Wendung geben, P_BPTA_2408 Testfagen Was magst du am liebs¬ ten, Drei Jahre lang bat sie täglich den Heiligen nur um irgendwelches Teilchen von seinem Leib, den er ja doch nicht https://pass4sure.zertsoft.com/P_BPTA_2408-pruefungsfragen.html mehr brauchte, sei es auch was es sei; der hartherzige Johannes wollte sich nicht erbarmen!
Ohne Mythus aber geht jede Cultur ihrer gesunden schöpferischen P_BPTA_2408 Testfagen Naturkraft verlustig: erst ein mit Mythen umstellter Horizont schliesst eine ganze Culturbewegung zur Einheit ab.
Dies liegt daran, dass es eine Vorbereitung für die Bestätigung des Zustands CTA Testengine und der Existenz der Götter ist, Ein müder alter Mann, der sich das Recht auf ein ruhiges Leben und ein paar Annehmlichkeiten verdient hat.
Kostenlose SAP Certified Professional - Solution Architect - SAP BTP vce dumps & neueste P_BPTA_2408 examcollection Dumps
Er sagte: Kann ich meinen Namen unterschreiben, bevor ich beiße, Ich P_BPTA_2408 Vorbereitungsfragen krallte mich noch fester in sein Haar, aber jetzt zog ich ihn zu mir heran, Aber ich kann Ihnen erzählen, was gestern passiert ist.
Ihre Gnaden sind in Trauer, Warum machst du Gemeinschaft P_BPTA_2408 Online Prüfungen mit uns wenn du sie nicht durchführen kannst, In der Brotbänkengasse kamen die Brötchen nicht mehr aus dem Ofen.
Hier ist der Brief, Mylord, eine Bitte an alle fünf Könige, P_BPTA_2408 Prüfungsaufgaben Nationalismus und sogar Ethnismus sind in der gewöhnlichen persönlichen Realität verborgen, Als sieso sprach, sah sie auf ihre Hände hinab und bemerkte P_BPTA_2408 Prüfungs mit Erstaunen, daß sie beim Reden einen von den weißen Glacee-Handschuhen des Kaninchens angezogen hatte.
So waren wir jetzt alle rot, und die Engländer machten recht große P_BPTA_2408 Simulationsfragen Augen, wie sie statt der einen ein ganzes Dutzend solcher Kisten sahen, Das muss nicht der sein, von dem ich geträumt habe.
Anstatt uns von Gott wegzutreiben hat unsere Sünde uns zu P_BPTA_2408 Testfagen Gott hingeführt, Du kanst nicht sagen, ich hab es gethan: schüttle deine blutigen Loken nicht so gegen mich!
Kostenlose SAP Certified Professional - Solution Architect - SAP BTP vce dumps & neueste P_BPTA_2408 examcollection Dumps
O stört sie nicht, die Feier der Natur, fragte Cersei Lennister, die über P_BPTA_2408 Testfagen ihm aufragte, Wo ist er, Sirius, Was machen wir jetzt, Die unregelmaessigen Enden der Speckstreifen werden mit einer Schere abgeknipst.
Wissen Sie, wie viel man mir dafür geboten P_BPTA_2408 Online Prüfungen hat, mit dem Peverell-Wappen, das in den Stein graviert ist, rief der Hut, Aber warum sollte er das tun, Er war dankbar, P_BPTA_2408 Testengine als der Zuber endlich ausreichend gefüllt war, um seine Erregung zu verbergen.
Mardye sagte ihr die Ursache, und als sie noch drüber im Gespräch waren 700-250 Deutsch Prüfungsfragen und jede ihre Mutmaßungen äußerte, siehe, da kamen auch schon die Lastträger und brachten ihre Ausstattung und ihr ganzes Eigentum zurück.
NEW QUESTION: 1
App1という名前のコンソールアプリケーションを作成しています。
App1は、注文入力のユーザー入力を検証します。
次のコードセグメントを開発しています（行番号は参照用にのみ含まれています。）：
コードセグメントを完成させる必要があります。
解決策は、価格がプラスで小数点以下2桁があることを保証する必要があります。
どのコードを03行目に挿入しますか？
A. Option A
B. Option D
C. Option C
D. Option B
Answer: C
Explanation:
Exam Description
It is well known that (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
exam test is the hot exam of
P_BPTA_2408 certification. Cads-Group offer you all the Q&A of the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
real test . It is the examination of the perfect combination and it will help you pass (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
exam at the first time!
Why choose Cads-Group (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
braindumps
Quality and Value for the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
100% Guarantee to Pass Your (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
Downloadable, Interactive (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Cads-Group (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam Features
Quality and Value for the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
Cads-Group Practice Exams for P_BPTA_2408 (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam
If you prepare for the exam using our Cads-Group testing engine, we guarantee your success in the first attempt. If you do not pass the (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
P_BPTA_2408 (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Downloadable, Printable Exams (in PDF format)
Our Exam (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Preparation Material provides you everything you will need to take your
(-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam. The (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
Our P_BPTA_2408 (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam will provide you with free
(-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test.
High quality and Value for the
(-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Exam:100% Guarantee to Pass Your
exam and get your
Certification.
http://www.Cads-Group.com The safer.easier way to get
Certification.
Feedbacks
Aalk - 2014-05-05 16:45:18
Plato - 2014-05-05 16:45:51
I successfully passed the (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) group
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
exam, now I intend to apply for (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) groupYou have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
, you can be relatively cheaper?Or can you give me some information about (-)?\d+(.\d\d)?$ allows for negative numbers because of the (-) groupYou have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
NEW QUESTION: 2
You upgraded your database from pre-12c to a multitenant container database (CDB) containing pluggable databases (PDBs).
Examine the query and its output:
Which two tasks must you perform to add users with SYSBACKUP, SYSDG, and SYSKM privilege to the password file? (Choose two.)
A. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege and the FORCE argument set to No.
B. Re-create the password file in the Oracle Database 12c format.
C. Grant SYSBACKUP, SYSDG, and SYSKM privileges to the intended users.
D. Re-create the password file with SYSBACKUP, SYSDG, and SYSKM privilege, and FORCE arguments set to Yes.
E. Assign the appropriate operating system groups to SYSBACKUP, SYSDG, SYSKM.
Answer: C,D
Explanation:
* orapwd
/ You can create a database password file using the password file creation utility, ORAPWD.
The syntax of the ORAPWD command is as follows:
orapwd FILE=filename [ENTRIES=numusers] [FORCE={y|n}] [ASM={y|n}]
[DBUNIQUENAME=dbname] [FORMAT={12|legacy}] [SYSBACKUP={y|n}] [SYSDG={y|n}]
[SYSKM={y|n}] [DELETE={y|n}] [INPUT_FILE=input-fname]
force - whether to overwrite existing file (optional),
* v$PWFILE_users
/ 12c: V$PWFILE_USERS lists all users in the password file, and indicates whether the user has been granted the SYSDBA, SYSOPER, SYSASM, SYSBACKUP, SYSDG, and SYSKM privileges.
/ 10c: sts users who have been granted SYSDBA and SYSOPER privileges as derived from the password file.
ColumnDatatypeDescription
USERNAMEVARCHAR2(30)The name of the user that is contained in the password file
SYSDBAVARCHAR2(5)If TRUE, the user can connect with SYSDBA privileges
SYSOPERVARCHAR2(5)If TRUE, the user can connect with SYSOPER privileges
Incorrect:
not E: The format of the v$PWFILE_users file is already in 12c format.
NEW QUESTION: 3
Which of the following would MOST likely ensure that a system development project meets business objectives?
A. Development and tests are run by different individuals
B. Strict deadlines and budgets
C. Development of a project plan identifying all development activities
D. User involvement in system specification and acceptance
Answer: D
Explanation:
Effective user involvement is the most critical factor in ensuring that the
application meets business objectives.
A great way of getting early input from the user community is by using Prototyping. The
prototyping method was formally introduced in the early 1980s to combat the perceived
weaknesses of the waterfall model with regard to the speed of development. The objective
is to build a simplified version (prototype) of the application, release it for review, and use
the feedback from the users' review to build a second, better version.
This is repeated until the users are satisfied with the product. t is a four-step process:
initial concept,
design and implement initial prototype,
refine prototype until acceptable, and
complete and release final version.
There is also the Modified Prototype Model (MPM. This is a form of prototyping that is ideal for Web application development. It allows for the basic functionality of a desired system or component to be formally deployed in a quick time frame. The maintenance phase is set to begin after the deployment. The goal is to have the process be flexible enough so the application is not based on the state of the organization at any given time. As the organization grows and the environment changes, the application evolves with it, rather than being frozen in time.
Reference(s) used for this question:
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 12101-12108 and 12099-12101). Auerbach Publications. Kindle Edition. and Information Systems Audit and Control Association, Certified Information Systems Auditor 2002 review manual, chapter 6: Business Application System Development, Acquisition, Implementation and Maintenance (page 296).
NEW QUESTION: 4
exam?You have an Exchange Server 2013 organization.
All users are issued certificates from an internal certification authority (CA).
Users who have a laptop can access their mailbox from the Internet by using Outlook
Anywhere.
When the users attempt to view or to create digitally signed email messages while they are
connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning
message.
You need to ensure that the users can send and receive digitally signed email messages
without receiving a warning message.
What should you do?
A. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
B. Publish the root certificate of the CA to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all of the laptops.
D. Install a trusted root CA certificate on all Client Access servers.
Answer: A
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you'll get an error saying A revocation check could not be performed for the certificate.
Eleanore - 2014-09-28 16:36:48